Sharp FO-IS115N operation manual Trouble- shooting, memory, see If the memory becomes full on page

Messages and Signals

FAX RX IN MEMORY	A fax has been received in memory because the toner
	cartridge needs replacement, you have run out of
	printing paper, or the paper is jammed. Another
	message will alternate with this message to indicate the
	problem. The fax will print out automatically when the
	problem is fixed.
HEATER HIGH /	If this message appears, unplug the power cord and
HEATER LOW /	then plug it back in. If the message still appears, call for
LASER ERROR	service.
LINE ERROR	Transmission or reception was not successful. Press
	STOP	to clear the message and then try again. If the
	error persists, see Line error on page 121.
M: xx%	This shows the percentage of the machine’s memory
	currently in use.
M#xxx	This appears while a document is being scanned and
	indicates the memory number assigned to the job (the
	number appears in “xxx”). This number appears when
	you check or cancel a job with the INFO key (page 67).
MEMORY FULL	If faxes have been received to memory because printing
	is not possible, resolve the problem so that printing can
	continue (see Reception to Memory on page 70).
	If faxes are being held in memory because the Print
	Hold function has been activated, print the faxes as
	explained on page 89.
	If you are attempting to broadcast or transmit from
	memory, see If the memory becomes full on page 81.
	If you are copying, see If MEMORY FULL appears on
	page 79.
OUT OF PAPER /	Printing was canceled because the tray is out of paper.
PRINT CANCELED	Press any key to clear the message, add paper, and
	repeat the print job.
PAPER JAMMED	The printing paper is jammed. See page 132.
PRT. HOLD DATA EXIST	A received fax is being held in memory because the
	Print Hold function has been activated. Enter your Print
	Hold code to print the fax (see page 89).

11. Trouble- shooting

127