Sharp FO-IS115N operation manual Dialling and fax transmission problems

Problems and Solutions

Dialling and fax transmission problems

	Problem		Solution
No dial tone when you		•	Make sure the handset cord is connected to the
pick up the handset or			correct jack. See Connecting the handset on page 13.
press	SPEAKER
	.	•	Make sure that the telephone line is properly
			connected to both the TEL. LINE socket and the wall
			socket (see page 15).
		•	Make sure that the telephone line is good.
Dialling is not possible.		•	Make sure the power cord is properly plugged into a
			power outlet.
		•	Make sure that the telephone line is properly
			connected to both the TEL. LINE socket and the wall
			socket (see page 15).
The power is on, but no		•	Make sure that the receiving machine has paper.
transmission takes place.
		•	If the receiving machine is in manual mode with no
			attendant, reception will not be possible.
		•	Check the display for error messages.
		•	SPEAKER	and check for a
			Pick up the handset or press
			dial tone. Dial the receiving machine manually and
			make sure that it is responding (you should hear a fax
			tone).
Nothing is printed at the		•	Make sure that the document for transmission is
receiving end.			placed face down in the feeder.
A distorted image is		•	Noise on the telephone line may cause distortion. Try
received at the other end.			sending the document again.
		•	Make a copy of the document on your machine. If the
			copy is also distorted, your machine may need
			service.

122