Setting Up and Using OpenLCR
Registering by fax
To register by fax, fill in the Fax
Transmission Test and OpenLCR
Line Activation Form, and then fax the form as follows:
1 Place the form with the side you
wrote on face down, and push it gently into the document feeder of the fax machine.
READY TO SEND
2 Press the OpenLCR key, the 5 key,
and then the START/MEMORY key.
| 5 |
OpenLCR | START/MEMORY |
•Your fax automatically calls OpenLCR and sends the form. After the form is sent, your fax will automatically receive the rate data. This lasts one or two minutes. When downloading is completed, the display will briefly show DOWNLOAD OK!! and then revert to the date and time. Your fax will print out the registration form to confirm that it was received.
•OpenLCR will also program the date and time and your fax number in your fax machine.
Registering by phone
To register by phone, follow these steps:
1 Pick up the handset on the fax
machine.
2 Press the OpenLCR key and then the 1 key.
1
OpenLCR
3 If the display shows the alternating
messages at right, press the number keys to enter your fax/ phone number, including the area code (the number must be 10 digits long). When finished, press the START/MEMORY key.
(If the message at right doesn’t appear, this step is not necessary.)
SET OWN NUMBER
10 DIGITS
Enter your phone number (with area code)
START/MEMORY
Important!
Be sure that you enter your correct area code and fax number. If not, your fax may not dial the correct number to connect to OpenLCR.
28