Sharp UX-465L operation manual Remote Operations, Remote code number, Toll Saver

Remote Operations

Remote Operations

You can call the UX-465L from any touch-tone telephone and play back your messages using the remote commands. You can also use these commands to change the reception mode and other settings.

Remote code number

To perform remote operations, you must first program a remote code number. This number is used to prevent unauthorized people from listening to your messages or changing the settings of your machine.

The remote code number has been set to "001" at the factory. If you want to change it, press the panel keys as shown below.

1 Press these keys:

FUNCTION

0

Toll Saver

When you call the UX-465L to listen to your messages, it will answer after two rings if it has received at least one message, or after four rings if it has not received any messages.

This allows you to save money on telephone charges, particularly if you are calling long distance. If the machine does not answer after the second ring, you can simply hang up before it answers, saving yourself the cost of that call.

If you do not want to use the Toll Saver function, you can turn it off by following the steps below. In this case, the UX-465L will answer after the number of rings set in Changing the number of rings (see page 49),

Answering	Machine
3.

REMOTE CODE

Press 4 times

the ring setting for FAX reception mode.

2 Enter a 3-digit number by pressing

the number keys.

2 2 2

(Example)

1 Press these keys:

FUNCTION

0

3 Press the START/MEMORY key

and then the STOP key.

STOP

START/MEMORY

TOLL SAVER

Press twice

49