Sharp UX-465L operation manual Retrieving your messages

Remote Operations

2 Press 1 to turn Toll Saver on, or 2

to turn it off.

YES NO

1 or 2

3 Press the STOP key.

STOP

Retrieving your messages

Note: You can also access the UX- 465L for remote operation when the reception mode is set to FAX. In this case, call the UX-465L, press the "#" key immediately after it answers (before you hear the fax tone), and then continue from Step 2 below.

1 Call the UX-465L from a touch-tone telephone. When your outgoing message begins, press the "#" key on the telephone.

•You will hear a short beep, and the outgoing message will stop.

2 Enter your remote code number and then # by pressing the keys on the telephone.

2 2 2

(Example)

•You will hear a series of beeps equal to the number of messages recorded, or one long beep if four or more messages have been received. The machine will then play back the messages, beeping once at the end of each message. When all messages have been played back, you will hear a long beep.

•If no messages have been received, you will hear a short beep. You can either hang up, or perform any of the operations described in the following section Other remote operations (see page 52).

50