SMSC LAN91C111 Chapter 16 Revision History, CORRECTION, SECTION/FIGURE/ENTRY, REVISION LEVEL & DATE, Table 16.1 Customer Revision History

10/100 Non-PCI Ethernet Single Chip MAC + PHY

Datasheet

Chapter 16 Revision History

Table 16.1 Customer Revision History

REVISION LEVEL & DATE	SECTION/FIGURE/ENTRY	CORRECTION
Rev. 1.9	All	Updated document references to Rev. C.
(07-17-08)
Rev. 1.9	Section 13.1, "Maximum	Fixed commercial temp range to state “0°C to
(07-17-08)	Guaranteed Ratings*," on	+70°C for LAN91C111”
	page 105
Rev. 1.9	Cover	Added bullet: “Commercial Temperature Range
(07-17-08)		from 0°C to 70°C (LAN91C111)”
Rev. 1.9	Section 8.24, "Bank 3 -	Changed REV default from “0001” to “0010”
(07-17-08)	Revision Register," on
	page 67
Rev. 1.9	Table 14.3, “Asynchronous	Changed T1A time in table under figure from 10nS
(07-17-08)	Cycle - nADS=0,” on	min to 2nS min.
	page 112
Rev. 1.9	Section 10.4, "Typical Flow	In step 4, changed last sentence from “If CRC is
(07-17-08)	of Event For Receive," on	incorrect the packet memory is released and no
	page 87	interrupt will occur.”, to “The RCV_BAD bit of the
		Bank 1 Control Register controls whether or not to
		generate interrupts when bad CRC packets are
		received.”
Rev. 1.9	Section 7.7.14, "Receive	Added note at end of 10 Mbps subsection stating
(07-17-08)	Polarity Correction," on	“The first 3 received packets must be discarded
	page 40	after the correction of a reverse polarity condition.”

Revision 1.91 (08-18-08) 128 SMSC LAN91C111 REV C

DATASHEET