Setting Up the Printer (Continued)
5 Decide the position of the source image to be used for adjusting the color balance.
To decide the position of the source image, move the highlighted area by pressing the F, f, G or g button while holding down the DISPLAY button on the sub panel.
Move the highlighted part to the desired image position by pressing the F, f, G or g button while holding down the DISPLAY button. (The COLOR BALANCE menu disappears temporarily.)
A B C
X Y Z
Q1 A | 1 | S |
6 Press the CAPTURE button.
The image captured in memory appears.
COLOR |
| BALANCE |
| COLOR : 200 | ||
PRN | SETUP | : PRESS | [ > ] | |||
BAL | X | B | C |
| 50 – 99] | |
BAL | Y | Y | : 50 | [1 – | 50 – 99] | |
X | Z | 20] | ||||
BAL | STEP | : 05 | [1 – | |||
TEST | PRINT : PRESS [EXEC] | |||||
Q1 A | 1 | S |
7 Select TEST PRINT by pressing the F or f button.
COLOR |
| BALANCE |
| COLOR : 200 | ||
PRN | SETUP | : PRESS | [ > ] | |||
BAL | X | B | C |
| 50 – 99] | |
BAL | Y | Y | : 50 | [1 – | 50 – 99] | |
X | Z | 20] | ||||
BAL | STEP | : 05 | [1 – | |||
TEST | PRINT : PRESS [EXEC] | |||||
Q1 A | 1 | S |
Position the cursor at TEST PRINT by pressing the F or f button.
T E S T PR I N T :
PRE S S [ E XEC ]
Press the F or f button until TEST PRINT appears.
100Installation and Adjustment