on the PRINTER SETUP menu changes linked with this button setting. You can change the number even when the printer is printing.

5RIBBON REMAIN button (20, 69 ) Press this button to display the type and the number of printouts that can still be made on the regular screen. To not display them, press this button again. The setting of RBN REMAIN on the OUTPUT SETUP menu changes linked with this button setting.

6INPUT SELECT button (14)

Press this button to select the input signal on the regular screen. When you press this button, the currently selected input signal is displayed for about three seconds. To select the input signal, release the button while the desired input signal is displayed. Each time you press this button, the input signal is switched in the order of VIDEO, RGB, S-VIDEO, RGB...

7MEMORY FRM/FLD button (18, 33) Press this button to select the memory mode on the regular screen. When you press this button, the currently selected memory mode is displayed for about three seconds. To select the memory mode, release the button while the desired memory mode is displayed. Each time you press this button, the memory mode is switched in the order of FRAME, FIELD, FRAME.

To make a printout of a captured image which is blurred, set the memory mode to FIELD and eliminate the blur by pressing this button, and then make a printout.

8MOTION CHECK button (46, 47) Press this button to select the mode on the regular screen to check whether the memory images are blurred when you captured two- or four-reduced images. Each time you press this button, the type is switched in the order of ON, OFF, ON...

The setting of MOTION CHK on the PRINTER SETUP menu changes linked with this button setting.

9CAPTION INPUT button (56)

Press this button to display or clear the CAPTION menu on the regular screen.

0CAPTION ON/OFF button (63)

Used to determine whether a caption is printed on the printout. To make a printout with a caption, press this button to display ON. To make a printout without a caption, press this button to display OFF.

qa CLEAR button (66, 67)

Press this button to clear the images captured in the memory pages. Which images can be cleared with the CLEAR button depends on the setting made with the FUNCTION SETUP menu.

When the clear function of this button is set to OFF, the buzzer sounds if you press the CLEAR button.

qs EXEC button (57, 91, 97, 101, 117, 118, 119)

Press this button to execute the values set with the COLOR ADJUST menu or to recall a user set in the PRINTER SETUP menu and to register the user set in the SYSTEM SETUP menu. Also, this button is used to enter the characters of a caption in the CAPTION menu.

qd Cursor keys

Use to select a desired item from the menu. Also, these keys are used to position the cursor (green pointer ) on the regular screen when capturing mulitple reduced images.

qf INPUT SETUP button (16, 79)

Press this button to display the INPUT SETUP menu on the regular screen.

qg DISPLAY button (20, 68, 100)

When the regular screen is displayed, pressing this button toggles the screen display on and off of (messages such as, Q1, A, etc.) regardless of the setting of the DISPLAY item in the OUTPUT SETUP menu. The setting of DISPLAY in the OUTPUT SETUP menu changes linked with this button.

When the menu is displayed, pressing this button temporarily clears the menu display. While this button is held down, the menu display disappears.

Others 137