To perform rough adjustment
To perform color balance adjustment beyond the current color balance range, increase the value of the BAL STEP.
COLOR | BALANCE | COLOR : 200 | ||
PRN | SETUP | : PRESS [ > ] | ||
BAL | X | : 50 | [1 – | 50 – 99] |
BAL | Y | : 50 | [1 – | 50 – 99] |
BAL | STEP | : 10 | [1 – | 20] |
TEST | : PRESS [EXEC] | |||
Q1 A | 1 | S |
If you change BAL STEP from 05 to 10, the color balances of the test print are changed as illustrated.
40&40 |
| 50&40 |
| 60&40 |
|
|
| ||
40&50 |
| 50&50 |
| 60&50 |
|
|
| ||
40&60 |
| 50&60 |
| 60&60 |
2 Make a test print by repeating steps 5, 6, 7 and 8 in “Adjusting the Color Balance” on page 98.
3 Select the image with the best color balance among the 9 images, if you can decide. Then display the values of BAL X and BAL Y by using the F, f, G or
gbutton.
Repeat steps 1 and 2 until you have obtained the best color balance.
4 Go back to step 10 in “Adjusting the Color Balance” on page 102.
Installation and Adjustment 103