Location

To prevent internal heat built-up, leave enough room around the printer for air to circulate through the vents on the left hand side of the cabinet.

Before Transporting the Printer

Before transporting the printer, use the following procedure to remove the supplied accessories and then put them back into their original packing. Transporting the printer with the supplied accessories still installed may cause malfunctioning.

1 Remove the ink ribbon cartridge and the paper tray.

2 Secure the internal thermal head, as follows:

1Use the POWER switch to turn on the printer.

2Press the MENU, G and gbuttons of the cursor keys on the sub panel simultaneously.

3Use the POWER switch to turn off the printer. The thermal head is now secured.

To release the thermal head

Turn on the printer again. The thermal head moves so that you can now install the ink ribbon cartridge again.

Cleaning

Note

Be sure to turn off the power of the printer before starting cleaning.

Cleaning the cabinet

Clean the cabinet, panel and controls with a soft dry cloth, or a soft cloth lightly moistened with a mild detergent solution. Do not use any type of solvent, such as alcohol or benzine, which may damage the finish.

Others 121