Setting Up the Printer (Continued)

Registering a User Set

You can store up to three settings of all the printer specifications, set or adjusted by using the buttons or with the menu, and store those settings as a user set. The printer retains these setting - even if you turn off the power.

Thus, different operators can make printouts with different settings by recalling the appropriate user set.

If the data of the recalled user set is modified, the printer operates according to the modified data. In such a case, the modified data remains effective until another user set is recalled with the LOAD USER button, even if you turn off the power.

After you finish all of required settings, proceed as follows to register them as a user set.

LOAD USER button

2,4,58 4,7
3,4,6

3

1 Display the SYSTEM SETUP menu.

To display the SYSTEM SETUP menu, see steps 1 to 3 in “Adjusting the Brightness of the Printer Window Display” on page 110.

If you want to name a user set, go to step 2.

If you do not want to name a user set, go to step 5.

2 Select USER NAME by pressing the F or f button.

SYSTEM

SETUP

COLOR : 200

PRN SETUP

: PRESS [ > ]

 

LCD - CONTR

:

7

 

 

 

 

BAUDRATE

: / 24 / 4800 / 96

 

BEEP

 

: OFF / ON

 

APPLI.

 

:

STANDARD

/

IRE

 

: 100 / 11 / 12 / 13

 

SAVE

USER

: 1 / 2 / 3 [ EXEC ]

 

USER

NAME

: PRESS [ > ]

 

Q1 A

 

 

1

 

S

US ER NAME :

PRE S S [ > ]

Display USER NAME by pressing the F or f button.

Position the cursor at USER NAME by pressing the F or f button.

116Installation and Adjustment