2 Press the INPUT SETUP button in the sub panel. The INPUT SETUP menu appears.
Or press the MENU button and display the INPUT SETUP menu by using the
Gor g button.
INPUT SETUP |
| COLOR : 200 | ||
/ COL / LAY / PRN / IN / OUT / |
| |||
INPUT SEL | : VIDEO / SV / R |
| ||
HUE | : | 0 |
|
|
|
| |||
COLOR | : | 0 |
|
|
|
| |||
GAIN | : | 0 |
|
|
|
| |||
|
| |||
OFFSET | : | 0 |
|
|
|
| |||
|
| |||
AGC | : OFF / ON |
| ||
Q1 A |
| 1 |
| S |
Switch IN to green by pressing the
Gor g button.
I NPUT S E T UP
/ c / l / p / I N / o /
Display IN in capital letters by pressing the G or g button.
3 Perform the adjustments as follows.
1Select the adjustment item by pressing the F or f button.
2Perform the adjustment by pressing the G or g button.
To adjust the color intensity, hue, contrast and brightness
Adjustment | Menu | Button to be pressed and operation result |
| |
| adjustment | G button | g button | |
| item | |||
|
|
|
|
|
Hue a) | HUE a) | The hue becomes purplish. | The hue becomes | |
|
|
| greenish. | |
|
|
|
| |
Color intensity COLOR b) | The color intensity weakens. c) | The color intensity | ||
|
|
| strengthens. | |
|
|
|
|
|
Contrast | GAIN d) | The contrast weakens. | The contrast strengthens. | |
Brightness | OFFSET | Becomes darker. | Becomes brighter. | |
|
|
|
|
|
a)In PAL mode, no HUE adjustment is provided on the INPUT SETUP menu.
b)Adjust the color such that skin tones appear natural. For the COLOR and HUE adjustment, you can correct the color intensity and hue of an NTSC composite video signal or a separated luminance (Y) and chrominance (C) signal.
c)On a setting of step
d)To perform adjustment of GAIN, set the AGC (explained below) to OFF.
When the printout or monitor image appears blackish or whitish
Adjust the input signal to the optimum level for printing.
Menu adjustment item | Selection | When |
AGC (Automatic | ON a) | The printout or monitor image appears |
Gain Control) |
| blackish or whitish. |
|
|
|
| OFF | The proper signal is input. (Normal) |
|
|
|
a) Adjust GAIN under the condition where AGC is set to ON.
Continue to the next page c
Installation and Adjustment 79