Connections

To enable printing, video equipment to act as an input signal source, and a video monitor to display images or menus must be connected.

The following diagrams illustrate how to make the input, output and remote control connections. Use this as a guide when connecting the required signals to and from the equipment to be used for printing.

Notes

•Turn off the power of each device before attempting to make any connections.

•Connect the AC power cord last.

Making Connections for Capturing Video Images

Connect the video equipment providing the video images to be printed. Connect the video equipment which will be used in actual printing, using the following diagram as a guide.

Before connecting the video equipment, see “Important safeguards/notices for use in the medical environments” for UP-51MD/51MDU/51MDP on page 2.

Video equipment

to RGB output connectors

to composite video

 

output connector

75-ohm coaxial cable with the BNC connectors

to S-VIDEO

output

 

 

connector

Connecting cable (with DIN 4-pin connectors) YC-15EV

to S-

to RGB/SYNC INPUT VIDEO75-ohm coaxial cable with the BNC connectors

INPUT

to VIDEO INPUT

75-ohm termination

NTSC/PAL selector a)

to AC IN

switch b) ON

 

 

OFF

NTSC PAL

 

 

 

 

 

to wall outlet

 

 

AC power cord

 

 

(supplied)

74Installation and Adjustment