Setting Up the Printer (Continued)

Selecting the Operation Mode for Automatic Printing

Capabilities

You can control the printer using either of the following remote control units connected to the REMOTE 2 or REMOTE 3 connector on the rear panel of the printer.

•RM-91 Remote control unit (not supplied): Connected to the REMOTE 2 connector

•FS-30 Foot switch (not supplied): Connected to the REMOTE 3 connector.

In addition, you can also remote control the printer by using a remote control unit which sends the remote control signal to the Pin No.5 of the REMOTE 3 connector.

Using the menu, you can assign the desired functions to the remote control unit connected to the REMOTE 2 or REMOTE 3 connector.

In addition, the printer can be remotely controlled by a pulse signal input to REMOTE 2 or REMOTE 3. (See pages 126 and 127).

Also, you can control the printer using a personal computer.

For detailed information on controlling with the computer, contact with your Sony dealer.

Note

The FS-36 foot switch is connected to REMOTE 2 to control the printer. However, the function of this foot switch cannot be assigned using the menu.

1,7 2,4,6

3

5,6

1 Press the MENU button, then select PRN by pressing the G or g button. The PRINTER SETUP menu appears on the source image.

PRINTER SETUP

COLOR : 200

/ COL / LAY /

PRN

/ IN / OUT /

PRINT QTY.

:

1 [ 1 ~ 9 ]

INTERVAL

:

OFF / ON

GAMMA

:

S / NORMAL / H

PRN SPEED

:

/ HIGH

 

MOTION CHK :

OFF / ON

LOAD USER

:

1 / 2 / 3 [ EXEC ]

SYSTEM

:

PRESS [ > ]

FUNCTION

:

PRESS [ > ]

C - BALANCE

:

PRESS [ > ]

Q1 A

 

1

S

 

 

 

 

 

Switch PRN to green by pressing the G or g button.

PR I NT ER S E T UP

/ c / l / PRN / i / o /

Display PRN in capital letters by pressing the G or g button.

104Installation and Adjustment