Before Printing (Continued)

Selecting the Input Signal

Before printing, select the input signal (the input connector to which the signal to be printed is being input) —VIDEO, S-VIDEO, or RGB. Once you have selected the input signal, this setting remains effective until you select another source.

The following two methods are available to select the input signal:

•Using the INPUT SELECT button

•Using the menu

Selecting the input signal by using the INPUT SELECT button

1

2,3

MEMORY SOURCE/ CAPTURE PRINT

PAGE MEMORY

POWER

ALARMPRINT

1 Turn on the video monitor and the printer.

The following appears once the printer is ready to operate.

Video monitor screen

Printer window display

Q1 A

1

S

Q1 A

1

S

2 Press the INPUT SELECT button.

The currently selected input signal appears. The selected signal is lit in green on the video monitor screen and spelled out in the printer window display.

If you do not perform any operation after you press the INPUT SELECT button, the currently set item appears for about 3 seconds, after which it disappears.

 

 

 

 

 

 

INPUT SEL :

VIDEO/SV/R

 

 

 

 

 

 

The currently selected input signal

14

is lit in green and is spelled out.

Operation

 

 

 

 

 

 

 

 

I NPUT S E L :

V I DEO / s v / r

The currently selected input signal is spelled out.