5NTSC/PAL (NTSC/PAL TV) selector (74, 75) (only for models other than UP- 51MDU)

Set this selector according to the TV system of the input signal. If you change this setting, turn the printer power off, then back on again.

Selector position

When

NTSC

The NTSC system video

 

equipment is connected.

PAL

The PAL system video

 

equipment is connected.

8REMOTE 3 connector (D-SUB 9-pin) (76)

Used to connect the FS-30 Foot Switch. Or input remote control pulse signals for automatic printing.

9RS-232C connector (76)

Used to connect the computer to control the printer. For details, contact your nearest Sony dealer.

6REMOTE 1 connector (special mini jack) (76)

Used to connect the RM-5500 Remote Control Unit (not supplied) to be used as a wired remote control unit.

7REMOTE 2 connector (stereo mini jack) (76)

Used to connect the RM-91 Remote Control Unit (not supplied), or the FS-36 Foot Switch.

0- AC IN connector

Used to connect the printer to a wall outlet with the supplied power cord.

qa TOUTPUT connectors (75)

Used to connect the video monitor.

Refer to “Important safeguards/notices for use in the medical environment” for UP-51MD/ 51MDU/51MDP on page 2.

Connector

Connectable equipment

S-VIDEO

Video monitor with Y/C separated

 

input connector.

 

 

VIDEO

Video monitor with composite video

 

signal input connector

 

 

RGB SYNC

Video monitor with RGB/SYNC input

 

connectors.

 

 

Comparing the Printer Window Display with the Video

Monitor Display

You can operate the printer using either the printer window display or the video monitor display. The printer window display has a narrower display range and show only a limited number of characters. Use whichever method you prefer.

Regularscreen

COLOR : 200

COL OR : 2 0 0

Q1 A

4 F : 1

S

Q1 A

4F:1

S

Others 139