To set the MOTION CHECK function using the MOTION CHECK button
1,2
1 Press the MOTION CHECK button. The following screen appears.
If you do not perform any operation after you press the MOTION CHECK button,the currently selected setting appears for about 3 seconds, after whichit disappears.
MOTION CHK | OFF/ON |
The currently selected setting is lit in green
MOT I ON CHK :
OF F / o n
The currently selected setting is displayed in capital letters.
2 Select the desired setting by pressing the MOTION CHECK button.
Press the MOTION CHECK button repeatedly until the color of the desired setting turns green on the video monitor, or until the desired setting is displayed in capital letters on the printer window display.
Each time you press the MOTION CHECK button, the setting changes.
When you want to | Setting |
See the letters or fine images on the video monitor. | OFF |
Confirm whether the two or four reduced images | ON |
captured in the memory are blurred |
|
|
|
The screen is reset to the regular screen after a few seconds.
Note
Even if you change the setting of the MOTION CHECK function, the printout quality will not be affected.
Operation 47