Compensating for the level of the input signal
The images displayed on the video monitor (in EE mode, see page 84) or printouts still may be whitish due to poor contrast adjustment, even if AGC for the input signal is compensated. In such a case, you can adjust the contrast by adjusting GAIN in the INPUT SETUP menu. However, if you do not want to change the contrast of the video monitor screen, compensate for the level of the input signal in the SYSTEM SETUP menu.
Note
You cannot adjust an image once it has been captured in memory. Capture an image after compensating for the level of the signal input.
1,5 2,3
4
2
1 Press the MENU button, then select PRN by pressing the G or g button. The PRINTER SETUP menu appears.
PRINTER SETUP | COLOR : 200 | |||
/ COL / LAY / | PRN | / IN / OUT / | ||
PRINT QTY. | : | 1 [ 1 ~ 9 ] | ||
INTERVAL | : | OFF / ON | ||
GAMMA | : | S / NORMAL / H | ||
PRN SPEED | : | / HIGH |
| |
MOTION CHK : | OFF / ON | |||
LOAD USER | : | 1 / 2 / 3 [ EXEC ] | ||
SYSTEM | : | PRESS [ > ] | ||
FUNCTION | : | PRESS [ > ] | ||
C - BALANCE | : | PRESS [ > ] | ||
Q1 A |
| 1 | S | |
|
|
|
|
|
Switch PRN to green by pressing the G or g button.
PR I NT ER S E T UP
/ c / l / PRN / i / o /
Display PRN in capital letters by pressing the G or g button.
2 Select SYSTEM by using the F or f button, then press the g button. The SYSTEM SETUP menu appears.
SYSTEM | SETUP | COLOR : 200 | |||
PRN SETUP | : PRESS [ > ] |
| |||
LCD - CONTR | : | 7 |
|
| |
|
| ||||
BAUDRATE | : / 24 / 4800 / 96 |
| |||
BEEP |
| : OFF / ON |
| ||
APPLI. |
| : | STANDARD | / | |
IRE |
| : 100 / 11 / 12 / 13 |
| ||
SAVE | USER | : 1 / 2 / 3 [ EXEC ] |
| ||
USER | NAME | : PRESS [ > ] |
| ||
Q1 A |
|
| 1 |
| S |
S Y S T EM S E T UP
PRN SE T UP [ > ]
Continue to the next page c
Installation and Adjustment 81