Sony UP-50, UP-51MDP, UP-51MDU Error/Warning Messages (Continued)

Error/Warning Messages (Continued)

Message		Possible cause and remedies
On the video monitor	In the printer window
	display
END OF RIBBON	END OF RIBBON	The ink ribbon has been exhausted.
		t Replace the old one with a new ink ribbon cartridge.
		(See page 9.) (The ink ribbon cannot be reused.)
MECHA TROUBLE: HEAD	MECHA TROUBLE nn	• The ink ribbon cartridge is not loaded correctly
	HEAD	t Check the ink ribbon cartridge and load it
		correctly. (See page 9.)
		• The paper has jammed inside the printer.
		t Check the position where paper has jammed and
		remove any jammed paper from the printer. (See
		page 131.)

MECHA TROUBLE: TRAY	MECHA TROUBLE nn	The paper tray has moved out of position.
	TRAY	t Contact your Sony service facility or your Sony
		dealer to clear the error status.

The paper has jammed inside the printer.

tCheck the position where paper has jammed and remove any jammed paper from the printer. (See page 131.)

Warning Messages

In case of a warning, only warning messages appear. The ALARM lamp does not light.

Warning message		Possible causes and remedies
On the monitor	In the printer window
	display

HIT ANY KEY	HIT ANY KEY	This message appears when the remote control unit is
		used in CAP-STOP (CAPTURE STOP) mode and when
		the printer stops capturing images once images have
		been captured to all memory pages (to the last point of
		the last memory page).
		t Press any button. Printer operation is enabled after
		this.

INPUT MISMATCH	INPUT MISMATCH	• The TV system of the signal input from the source
		equipment (VTR, video camera and so on) is not
		compatible with the TV system of your printer.
		t Check the signal of the TV system and input the
		correct one.
		• An signal other than a video signal (such as an audio
		signal, etc.) is input.
		t Input the correct video signal.

130Others