3 Place the paper in the paper tray so that the printing surface faces down with the protection sheet.
Notes
•The paper tray holds up to about 100 sheets of paper. When adding paper to a partly full tray, be careful that the total number of sheets does not exceed the limit. If you exceed this limit, paper jams may occur.
•Load the paper so that it lays flat in the paper tray. If the paper is curled, it will overflow from the paper tray and the paper may not be fed properly. Be sure to riffle the paper with the protection sheets before attempting to place the paper in the paper tray. If the printing position shifts, load fewer sheets in the paper tray.
•Do not place different types of paper in the tray.
Place the paper in the paper tray with the printing surface facing down.
Protection sheet | Riffle the paper |
|
Printing | with the |
surface | protection sheet. |
Set the paper securely under the tab.
Front
4 Slide the paper tray back into the printer until it clicks into place.
MEMORY SOURCE/ CAPTURE PRINT
PAGE MEMORY
5 Close the front panel.
Notes
When handling the paper
Do not touch the printing surface. Dust or finger prints are likely to cause unsatisfactory printing or malfunction of the head. Hold the paper by the printing surface protection sheet.
When storing the paper
•Avoid storing the paper in a location subject to:
—high temperatures
—high humidity
—excessive dust
—direct sunlight
•Use the original package for storing unused paper.
Operation 13