Location and Function of Parts and Controls (Continued)
qh R/G/B/D/L button (86)
Press this button to display or clear the COLOR ADJUST menu on the regular screen.
qj LOAD COLOR button (87)
Press this button to recall the values set for the printout color (color intensity and color contrast). Pressing this button causes the
currently selected LOAD COLOR number to be displayed for about three seconds. Three kinds of LOAD COLOR numbers are available for the currently selected user set. To select the desired LOAD COLOR number, release the button while the desired LOAD COLOR number is displayed.
The selected LOAD COLOR number in the COLOR ADJUST menu changes linked with this button.
Rear
1tINPUT (input signal) connectors (74) Used to connect the video equipment supplying the source image.
Connector | Connectable equipment |
Video equipment with Y/C separated | |
| output connector |
|
|
VIDEO | Video equipment with composite video |
| signal output connector |
|
|
RGB SYNC | Video equipment with RGB/SYNC |
| output connectors |
275 Ω ON/OFF termination switch (74) Provided for the RGB input.
Normally set this switch to ON. Set it to OFF if the input signal should drop when you connect additional equipment to the video equipment.
375 Ω ON/OFF termination switch (74) Provided for the NTSC composite video signal in NTSC mode and PAL composite video signal in PAL mode.
Normally set this switch to ON. Set it to OFF if the input signal should drop when you connect additional equipment to the video equipment.
4
Equipotential ground terminal connector Used to connect to the equipotential plug to bring the various parts of a system to the same potential.
Refer to “Important safeguards/notices for use in the medical environments” for
138Others