2 Select WINDOW by pressing the F or f button.
LAYOUT SETUP | COLOR : 200 | ||
/ COL / LAY / PRN / IN / OUT / |
| ||
MEMORY | : FRAME / FIELD |
| |
MULTI PIX | : 1 / 2 / 4 / 8 / 16 |
| |
SEPARATE | : OFF / ON |
| |
MIRROR | : OFF / MIRROR |
| |
LAMINATION | : | GLOSSY | / |
WINDOW | : PRESS [ > ] |
| |
CAPTION | : PRESS [ > ] |
| |
Q1 A |
| 1 | S |
Position the cursor at WINDOW by pressing the F or f button.
Note
W I NDOW |
| : |
L A Y | PRE SS [ > ] | |
Press the F or f button until
WINDOW appears.
If you go to the next step after you select WINDOW in step 2, the images stored in the memory will be cleared.
3 Press the g button.
The WINDOW SETUP menu appears.
WINDOW SETUP |
| COLOR : 200 | |
LAY SETUP | : PRESS [ > ] | ||
H START | : | 0 | DOT (S) |
V START | : | 0 | DOT (S) |
H WIDTH | : 896 | DOTS | |
V WIDTH | : 464 | DOTS | |
SAVE | : PRESS [ EXEC ] | ||
CANCEL | : PRESS [ EXEC ] | ||
W I NDOW SE T UP
L A Y S E T UP [ > ]
Q1 A | 1 | S |
4 Adjust the printer according to the printout obtained.
1Select the item to be adjusted by pressing the F or f button.
2Perform the adjustment by pressing the G or g button.
Continue to the next page c
Installation and Adjustment 95