Specifications (Continued)

VIDEO (NTSC composite video signal for NTSC/EIA standards and PAL composite video signal for PAL B.G.I standards) BNC connector ⋅ 1

1 Vp-p, 75 ohms (terminated), sync negative

Controls connectors

REMOTE 1 : special mini jack ⋅ 1 For RM-5500 Remote Control Unit (not supplied)

REMOTE 2 (automatic printing connector): Stereo mini jack :

⋅1

For RM-91 Remote Control

Unit and FS-36 Foot Switch REMOTE 3 (automatic printing

connector): D-SUB 9-pin

connector: ⋅ 1 For FS-30 Foot Switch (not supplied)

(See “Selecting the Operation Mode for Automatic Printing Capabilities” page 104)

RS-232C (Computer control interface): D-SUB 25-pin connector ⋅ 1

Output: 5 kilohms at load Typical ± 8 V

Input: 5-kilohm load High level 5 to 15 V Low level –5 to –15 V

Supplied accessories

Color printing pack (1) Ink ribbon holder (1) Paper tray (1)

Paper cover (1)

Fan cover with a filter (1) Thermal head cleaning kit (1) AC power cord (1)

Warranty card (1)

(for UP-50/51MD/51MDU) Instructions for Use (1)

Optional accessories

UPC-510 Color Printing Pack UPC-540 Self-laminating Color

Printing Pack

Medical Specifications (for UP-51MD/51MDU/ 51MDP)

Protection against electric shock: Class I

Protection against harmful ingress of water:

Ordinary

Degree of safety in the presence of flammable anesthetics or oxygen:

Not suitable for use in the presence of flammable anesthetics or oxygen

Mode of operation: Continuous

Using the automatic printing capabilities (REMOTE 2/REMOTE 3)

If you send remote control pulse signals illustrated through the REMOTE 2 or REMOTE 3 connector, the printer is remotely controlled according to the remote control setting. (See page 104.)

Turn on the power of the printer and display the source image on the monitor screen. Send a remote control pulse signal at the timing shown below. The timing depends on the setting on item IMMED. CAP of the FUNCTION SETUP menu.

Note

The remote control pulse signal examples introduced here are one example of typical operation timing. The timing may be affected due to the memory page selected and print type.

CAPTURE timing pulse for REMOTE 2

REMOTE 2 connector pin assignment:

GND

BUSY

MIN

FL2FL1

CN5

1

2

3

126Others