Sun Microsystems 60 service manual 4Removing and Replacing the Scsi Drive Bay

Screw (2)

SCSI drive bay

FIGURE 8-4Removing and Replacing the SCSI Drive Bay

8.3.2Replacing the SCSI Drive Bay

Caution –Use proper ESD grounding techniques when handling components. Wear an antistatic wrist strap and use an ESD-protected mat. Store ESD-sensitive components in antistatic bags before placing them on any surface.

1.Replace the SCSI drive bay as follows (FIGURE 8-4):

a. Position the SCSI drive bay on the channel slides and slide it in.

Chapter 8 Major Subassemblies 8-9