Sun Microsystems 60 service manual 25Removing and Replacing the Shroud Assembly

6. Remove the shroud assembly from the motherboard.

Power cable

Locking lever

Captive screw

Captive screw

FIGURE 8-25Removing and Replacing the Shroud Assembly

8.10.2Replacing the Shroud Assembly

Caution –Use proper ESD grounding techniques when handling components. Wear an antistatic wrist strap and use an ESD-protected mat. Store ESD-sensitive components in antistatic bags before placing them on any surface.

1.Position the shroud assembly onto the motherboard.

2.Connect the shroud assembly as follows (FIGURE 8-25):

Chapter 8 Major Subassemblies 8-39