Sun Microsystems 60 service manual 1Removing and Replacing a Hard Drive

Hard drive handle	Handle latch
Hard drive

Drive bay

FIGURE 9-1Removing and Replacing a Hard Drive

9.1.2Replacing a Hard Drive

Caution –Use proper ESD grounding techniques when handling components. Wear an antistatic wrist strap and use an ESD-protected mat. Store ESD-sensitive components in antistatic bags before placing them on any surface.

1.Replace the hard drive as follows (FIGURE 9-1):

a.Holding the drive handle, insert the hard drive into the drive bay.

b.Push the front of the hard drive to connect it to the SCSI bus.

Chapter 9 Storage Devices 9-3