Sun Microsystems 60 service manual Keyboard, Code Example 4-11Ethernet Output Message

CODE EXAMPLE 4-11identifies the Ethernet output message.

CODE EXAMPLE 4-11Ethernet Output Message

Enter (0-12 tests, 13 -Quit, 14 -Menu) ===> 2

TEST=’ethernet_test’

SUBTEST=’my_channel_reset’

SUBTEST=’hme_reg_test’

SUBTEST=’global_reg1_test’

SUBTEST=’global_reg2_test’

SUBTEST=’bmac_xif_reg_test’

SUBTEST=’bmac_tx_reg_test’

SUBTEST=’mif_reg_test’

SUBTEST=’mac_internal_loopback_test’

SUBTEST=’10mb_xcvr_loopback_test’

SUBTEST=’100mb_phy_loopback_test’

Enter (0-12 tests, 13 -Quit, 14 -Menu) ===>

4.7.4Keyboard

The keyboard diagnostic consists of an external and internal loopback. The external loopback requires a passive loopback connector. The internal loopback verifies the keyboard port by transmitting and receiving 128 characters.

CODE EXAMPLE 4-12identifies the keyboard output message.

CODE EXAMPLE 4-12Keyboard Output Message

Enter (0-12 tests, 13 -Quit, 14 -Menu) ===> 3

TEST=’keyboard_test’

SUBTEST=’internal_loopback’

Enter (0-12 tests, 13 -Quit, 14 -Menu) ===>

Chapter 4 Troubleshooting Procedures 4-17