Sun Microsystems V880, V890 manual Enter partition Partition menu is displayed

Maintaining disk drives

3.Enter: partition

The partition menu is displayed:

PARTITION MENU:

0- change `0' partition

1 - change `1' partition

2 - change `2' partition

3 - change `3' partition

4 - change `4' partition

5 - change `5' partition

6 - change `6' partition

7 - change `7' partition select - select a predefined table

modify - modify a predefined partition table

name	- name the current table
print	- display the current table
label	- write partition map and label to the disk
!<cmd>	- execute <cmd>, then return
quit
partition>

4.At the partition> prompt, enter: print

The default partition table is displayed. The table for a 146-GB FC-AL data disk will look similar to the following example:

Current partition table (original):

Total disk cylinders available: 14087 + 2 (reserved cylinders)

Part	Tag	Flag	Cylinders			Size	Blocks	8405376
0	root	wm	0	-	412	4.01GB	(413/0/0)
1	swap	wu	413	-	516	1.01GB	(104/0/0)	2116608
2	backup	wm	0	- 14086		136.71GB	(14087/0/0) 286698624
3	unassigned	wm	517	-	826	3.01GB	(310/0/0)	6309120
4	unassigned	wm	827	-	1033	2.01GB	(207/0/0)	4212864
5	unassigned	wm	1034	-	1240	2.01GB	(207/0/0)	4212864
6	unassigned	wm	1241	-	1447	2.01GB	(207/0/0)	4212864
7	unassigned	wm	1448	- 14086		122.66GB	(12639/0/0) 257228928

partition>

5.Partition the disk by completing the following Steps a through e for all partitions specified in the Disk partition values on page 110.

a.At the partition> prompt, enter the partition number from the table. For example:

partition> 0

The system prompts for the partition ID tag.

Avaya CMS Sun Fire V880/V890 Installation, Maintenance, and Troubleshooting May 2006 113