Sun Microsystems V890 Enter the following commands, Setenv auto-boot? false Reset-all, Probe-scsi

Maintenance

23. Enter the following commands:
	setenv auto-boot? false
	reset-all
	The system reboots to the ok prompt.
24.	Enter:
	probe-scsi
	This verifies that the system recognizes all of the disk devices, including the newly
	installed ones. A message that is similar to the following example is displayed:
LiD HA LUN			--- Port WWN ---	-----Disk description -----
0	0	0	21000004cf72f08f	SEAGATE ST373405FSUN3660438
1	1	0	21000004cf721553	SEAGATE ST373405FSUN3660438
6	6	0	508002000016b5b1	SUNW	SUNWGS INT FCBPL9224
3	3	0	21000004cf72114b	SEAGATE ST373405FSUN3660438
4	4	0	21000004cf7211ae	SEAGATE ST373405FSUN3660438
	The devices listed depends on the number of disks that are installed in the system.
25. Enter the following commands:
	!	CAUTION:
		If you fail to enter these commands, any reboots that you do in the future will stop
		at the boot prompt instead of proceeding through the normal boot-up process.

setenv auto-boot? true

boot -r

The system reboots.

26.Log in as root.

27.Continue with Setting up the disk drives on page 109.

108 Avaya CMS Sun Fire V880/V890 Installation, Maintenance, and Troubleshooting May 2006