Sun Microsystems V890, V880 manual System reboots

Troubleshooting

3.Enter: probe-scsi-all

The program displays a message that is similar to the following:

/pci@8,600000/SUNW,qlc@2				-----Disk description -----
LiD HA LUN			--- Port WWN ---
0	0	0	21000004cf72f08f	SEAGATE ST373405FSUN3660438
1	1	0	21000004cf721553	SEAGATE ST373405FSUN3660438
2	2	0	21000004cf7213ea	SEAGATE ST373405FSUN3660438
6	6	0	508002000016b5b1	SUNW	SUNWGS INT FCBPL9224
3	3	0	21000004cf72114b	SEAGATE	ST373405FSUN3660438
4	4	0	21000004cf7211ae	SEAGATE	ST373405FSUN3660438
5	5	0	21000004cf7214a3	SEAGATE	ST373405FSUN3660438

/pci@8,700000/scsi@1
Target 5		Removeable Tape	HP	C5683A	C005
Unit 0
Target	6	Removeable Read Only device TOSHIBA DVD-ROM SD-M14011009
Unit	0

/pci@8,700000/pci@5/SUNW,1sptwo@4

4.Verify that the DVD drive is recognized. This example shows the default SCSI devices, the tape drive (target 5), and the DVD drive (target 6).

If the test fails to show all of the installed SCSI drives, you may have to replace the drive.

5.When you finish testing, enter the following commands:

!CAUTION:

If you fail to enter these commands, any reboots that you do in the future will stop at the boot prompt instead of proceeding through the normal boot-up process.

setenv auto-boot? true

boot -r

The system reboots.

188 Avaya CMS Sun Fire V880/V890 Installation, Maintenance, and Troubleshooting May 2006