Sun Microsystems V890, V880 manual PCI slot LEDs are defined as follows, Power on Fault

Troubleshooting

The PCI slot LEDs are defined as follows:

Name	Icon	LED function
Power on		Lights when the slot is receiving power.
Fault		Blinks while the card is being tested, when a hot-plug
		operation is in progress, or when the card is turned on
		but logically detached from the operating system.
		Stays lit if the card encounters a fault.
OK-to-remove		Lights when it is safe to remove the card.
		Important: If this LED stays lit after inserting a card,
		you must shut down the system, reinsert the card, and
		reboot the system. Consult the customer before you
		shut down the system.

The following table shows how to interpret the PCI slot LED patterns.

	Icon		Interpretation
Power on	Fault	OK-to-remove
Off	Off	Off	The slot power is off. A card can be safely
			inserted to start a hot-plug operation.
On	Blinking	Off	The installed card is being tested,
			configured, or unconfigured, or the card is
			turned on but logically detached from the
			operating system.
On	Off	Off	The slot power is on and the card is
			operating normally.
Off	On	On	The PCI card has encountered a fault. The
			card can be safely removed.
Off	Off	On	The card can be safely removed.

180 Avaya CMS Sun Fire V880/V890 Installation, Maintenance, and Troubleshooting May 2006