Sun Microsystems V890, V880 manual Enter partition id tag unassigned

Maintenance

b.Enter the partition ID tag from the table. For partition 0, press Enter to accept the default of unassigned.

Enter partition id tag [unassigned]:

The system prompts for permission flags.

c.Enter the permission flag, usually wm or wu. The system prompts for the starting cylinder.

d.Enter the number of the starting cylinder from the table. For example:

Enter new starting cyl [0]: 0

The system prompts for the partition size.

e. Enter the partition size from the table. For example:

Enter partition size [0b, 0c, 0mb]: 2gb

The partition> prompt is displayed.

6.When you have sized all of the partitions, enter: print

7.Compare the partition table that is now displayed to the Disk partition values on page 110. If there are any discrepancies, correct them by repeating the disk partitioning.

8.When you determine that the disk partitioning is correct, enter: label

The system prompts you to continue.

! Important:

Do not forget to label the disk drive.

9.Enter: y

The partition> prompt is displayed.

10.Enter: q

The format> prompt is displayed.

11.Enter: format

The following message is displayed:

Ready to format. Formatting cannot be interrupted and takes XX minutes (estimated). Continue? (y or n)

114 Avaya CMS Sun Fire V880/V890 Installation, Maintenance, and Troubleshooting May 2006