Sun Microsystems V890 Identifying installed PCI cards, Usr/platform/‘uname -m‘/sbin/prtdiag -v pg

Installation

Identifying installed PCI cards

If there are problems with the PCI cards, do the following to troubleshoot the problem. If all PCI cards are operational, you can skip this procedure.

At the command prompt, enter:

/usr/platform/‘uname -m‘/sbin/prtdiag -v pg

In the section IO Cards, there is a listing of the PCI cards. The following examples are some of the entries you might see. The display you see depends on your specific configuration.

.

.

========================= IO Cards =========================

	IO	Port	Bus		Bus	Max	Dev,
Brd					Freq	Bus		State	Name
	Type	ID	Side Slot MHz			Freq	Func
Model	---- ---- ---- ---- ---- ----						----	-----	------------------------------------------------------
----
I/O	PCI	8	B	1	33	33	4,0	ok	SUNW,XVR-100 SUNW,375-3181
I/O	PCI	8	B	0	33	33	5,0	ok	scsi-pci1000,30.1000.10c0.7/disk+LSI,1030
I/O	PCI	8	B	0	33	33	5,1	ok	scsi-pci1000,30.1000.10c0.7/disk+LSI,1030
I/O	PCI	9	B	6	33	33	2,0	ok	pci-pci8086,b154.0/pci (pci) PCI-BRIDGE
I/O	PCI	9	B	6	33	33	0,0	ok	pci-pci8086,b154.0/network (netw+ pci-bridge/pci-bridge
I/O	PCI	9	B	6	33	33	0,0	ok	network-pci100b,35.30 SUNW,pci-qge/pci-bridg+
I/O	PCI	9	B	6	33	33	1,0	ok	network-pci100b,35.30 SUNW,pci-qge/pci-bridg+
I/O	PCI	9	B	6	33	33	4,0	ok	pci-pci8086,b154.0/network (netw+ pci-bridge/pci-bridge
I/O	PCI	9	B	6	33	33	2,0	ok	network-pci100b,35.30 SUNW,pci-qge/pci-bridg+
I/O	PCI	9	B	6	33	33	3,0	ok	network-pci100b,35.30 SUNW,pci-qge/pci-bridg+
.
.

In this example:

●Slot 0 has a Dual Ultra320 SCSI card. There are two entries for a this card because the card has two SCSI ports.

●Slot 1 has a graphics card.

●Slot 6 has a Quad GigaSwift Ethernet card. There is more than one entry for this card because the card has four ethernet ports.

44 Avaya CMS Sun Fire V880/V890 Installation, Maintenance, and Troubleshooting May 2006