Reference
96 TDS1000/2000-Series Digital Oscilloscope User Manual
Print
Push the PRINT button to send the screen data to a print er or
computer.
The print function requires the optional TDS2CMA Communications
Extension Module. The module includes Centronics, RS-232, and
GPIB ports.
Refer to the TDS2CMA Communications Module chapter on
page 127 for complete operating i nformation. Refer to Optional
Accessorie s on page 169 for ordering information.
Probe Check
You can use the Probe Check Wizard to quickly verify that your
probe is operating properly.
To use the Probe Check Wizard, push the PROBE CHECKbut ton. If
your probe is connected properly, compensated properly, and the
Probe entry in the oscilloscope VERTICAL menu is set to match
your probe, the oscilloscope will display a PASSEDmessage at the
bottom of the screen.Otherwise, the oscilloscope will display
directions on the screen to guide you in c orrecting these problems.