Application Examples
TDS1000/2000-Series Digital Oscilloscope User Manual 43
3. Connect the channel 1 probe to the signal.
4. Push the AUTOSET button.
The oscilloscope setsthe vertical, horizontal, and trigger controls
automatically. Ifyou want to optimize the display of the waveform,
you can manually adjust thesecontrols.
NOTE. The oscilloscopedisplays relevant automaticmeasurements in
the waveform area of the screen based on the signal type detected.
For oscilloscope-specific descriptions,refer to page 79 in the
Reference chapter.
Taking Automatic Measurements
The oscilloscope cantake automatic measurements of most
displayed signals. To measure signal frequency, period, and
peak-to-peak amplitude,rise time, and positive width, follow these
steps:
1. Push the MEASURE button to see the Measure Menu.
2. Push the top option button; the Measure 1 Menu appears.