Reference
TDS1000/2000-Series Digital Oscilloscope User Manual 97
Save/Recall
Push the SAVE/RECALLbutton to save or recall oscilloscope setups
or waveforms.
Setups
Options Settings Comments
Setups Highlighting Setups displaysthe menus
for storing or recalling oscillo scope setups
Setup 1to10 Specif ies the memory location in which to
save the current oscilloscope se ttings or
from which to recall the settings
Save Completes the save action
Recall Recalls the oscilloscope settings stored in
the location chosen inthe Setup field
Key Points
Saving and Recalling Setups. The complete setup is stored in
nonvolatile memory. When yourecall the setup, the oscilloscope will
be in the mode from which the setup was saved.
The oscilloscope savesthe current setup if you wait threeseconds
after the last change beforeyou power off the oscilloscope.The
oscilloscope then recallsthis setup the next time you apply power.
Recalling the Default Setup. You can push the DEFAULT SETUP
button to initialize the oscilloscopeto a known setup. To view option
and control settingsthat the oscilloscope recalls when you push this
button, refer to Appendix D: Default Se tup on page 175.