Operating Basics
38 TDS1000/2000-Series Digital Oscilloscope User Manual
Menu and Control Buttons
All models
SAVE/RECALL. Displays the Save/Recall Menufor setups and
waveforms.
MEASURE.Displa ys the automated measurements menu.
ACQUIRE. Displays the Acquire Menu.
DISPLAY.Displays the Display Menu.
CURSOR. Displays the CursorMenu. Vertical Positioncontrols adjust
cursor positionwhile displaying the Cursor Menu and the cursors are
activated. Cursors remain displayed (unless the Type option is set to
Off) after leaving the Cursor Menu but are not adjustabl e.
UTILITY.Displays the Utility Menu.
HELP. Displays the Help Menu.
DEFAULTSETUP.Recalls the factory setup.
AUTOSET. Automatically sets the oscilloscopecontrols to produce a
usable display of the input signals.
SINGLE SEQ. Acquires a single waveform and then stops.
RUN/STOP. Continuously acquires waveforms or stops the a cquisition.
PRINT.Sta rts print operations. An extension module with a Centron-
ics, RS-232, or GPIB port is required. Refer to Optional Accessories
on page 169.