Reference
112 TDS1000/2000-Series Digital Oscilloscope User Manual
Vertical
You can use the vertical controls to display waveforms, adjust
vertical scale and position, and set input param eters. Refer to
page 93 for the vertical mat h descriptions.
Channel Vertical Menus
There is a separate vertica l menu for each channel. Each option is set
individually for each channel.
Options Settings Comments
Coupling DC
AC
GND
DC passes both AC and DC componentsof
the input signal
AC blocks the DC component of the input
signal and attenuates signals below 10 Hz
GND disconnects the input signal
BW Limit 20 MHz*
Off
Limits the bandwidth to reduce display
noise; filters the signalto reduce noise and
other unwanted high frequency components
Volts /Div Coarse
Fine
Selects the resolutionof the Volts/Div knob
Coarse defines a 1-2-5 sequence. Fine
changes the resolution to smallsteps
between the coarse settings
Probe 1X
10X
100X
1000X
Settomatchthetypeofprobeyouareusing
to ensure correct verticalreadouts
Invert On
Off
Inverts the wavef orm
* Bandwidth is reduced to 7 MHz with a 1X probe.