Appendix A: Specifications
164 TDS1000/2000-Series Digital Oscilloscope User Manual
Oscilloscope EMC Certifications and Compliances (Cont.)
Australia/New
Zealand
Meets the intent of AustralianEMC Framework as demonstrated to the
following specification:AS/NZS 2064.1/2
U.S.A. Emissions complywith FCC Code of Federal Regulations 47,
Part 15, Subpart B, Class A Limits
Oscilloscope Safety Certifications and Compliances
Certifications CAN/C SA C22.2 No. 1010.1 -92
UL3111-1, First Edition
CSA Certified
Power Cords
CSA Certification includes the products and power cords appropriate
for use in the North America power network. All other power cords
supplied are approved for the countryof use.
Pollution Degree 2 Do not operate in environments where conductive pollutantsmay be
present.
Overvoltage
Category
Category: Examples of Products in this Category:
CAT III D istribution-levelmains, fixed installation
CAT II Local-level mains, appliances,portable equipment
CAT I Signal levels in special equipment or parts of equipment,
telecommunications,electronics
Adjustment (Factory Calibration) Interval
The recommended calibrationinterval is one year
Oscilloscope General Certifications and Compliances
Russian Federation This product was certified by the GOST ministry of Russia to be
in compliancew ithall applicable EMC regulations.
Peoples Republic of
China
This product has receivedthe Chinese Metrology Certification (CMC)