Chapter 12: Statistics 274
2. Press … 5 to select 5:SetUpEditor. SetUpEditor
is pasted to the home screen.
Press Í. This removes lists from stat list editor
columns 1 through 20, and then stores lists L1
through L6 in columns 1 through 6.
Note: Removing lists from the stat list editor does
not delete them from memory.
3. Press … 1 to select 1:Edit from the STATEDIT
menu. The stat list editor is displayed. If elements
are stored in L1 and L2, press } to move the
cursor onto L1, and then press ‘ Í ~ }
‘ Í to clear both lists. Press | to move
the rectangular cursor back to the first row in L1.
4. Press 6 Ë 5 Í to store the first pendulum
string length (6.5 cm) in L1. The rectangular cursor
moves to the next row. Repeat this step to enter
each of the 12 string length values in the table.
5. Press ~ to move the rectangular cursor to the first
row in L2.
Press Ë 51 Í to store the first time
measurement (.51 sec) in L2. The rectangular
cursor moves to the next row. Repeat this step to
enter each of the 12 time values in the table.