Appendix B: Reference Information 649
Error in Xmit • The TI-84 Plus was unable to transmit an item. Check
to see that the cable is firmly connected to both units
and that the receiving unit is in receive mode.
• You pressed É to break during transmission.
• You attempted to perform a backup from a TI.82 to a
TI-84 Plus.
• You attempted to transfer data (other than L1 through
L6) from a TI-84 Plus to a TI.82.
• You attempted to transfer L1 through L6 from a TI-84
Plus to a TI.82 without using 5:Liststo TI82 on the
LINK SEND menu.
ID NOT FOUND This error occurs when the SendID command is
executed but the proper graphing calculator ID cannot
be found.
ILLEGAL NEST • You attempted to use an invalid function in an
argument to a function, such as seq( within expression
for seq(.
INCREMENT • The increment in seq( is 0 or has the wrong sign. This
error is not returned during graphing. The TI-84 Plus
allows for undefined values on a graph.
• The increment in a For( loop is 0.
Error Type Possible Causes and Suggested Remedies