VBrick Systems ETV v4.2.1 NVR Types, NVR Performance Considerations, Standard NVR, Standalone NVR

Network Video Recording

NVR Performance Considerations

The NVR 40 lets you record any combination of up to 40 MPEG-1, MPEG-2, MPEG-4, and WM streams at a time. There are however performance considerations when recording multiple, simultaneous, high-rate MPEG-2 or WM streams. At MPEG-2 rates up to 5.5Mbps or WM rates up to 1.2Mbps 40 simultaneous recordings are supported. At higher rates however the full licensing capacity cannot be used. For example, when using the Best Quality WM template at 4.5Mbps, 10 simultaneous records are supported; when using MPEG-2 at 15Mbps, 15 simultaneous recordings are supported.

NVR Types

Standard NVR

A Standard NVR's record capability is managed by a Portal Server or Standalone NVR. In a standard NVR installation, the full Portal Server or Standalone NVR application is installed on one machine and the NVR application is installed on a separate machine. If you need to add recording capacity, you can add multiple NVRs as necessary. You use the Portal Server or a Standalone NVR application to configure the Standard NVR (see Configuring a Standard NVR). A standard NVR has these characteristics:

•supports record only.

•records 10 or 40 concurrent streams depending on license.

•is configured with the standard Portal Server Admin Console or the Standalone NVR Console.

•records from the Record button or the Scheduler module.

•Supports "batch" recording where one large file is recorded into multiple smaller files.

Note When purchasing additional NVRs, VBrick provides a single combined license that includes recording capacity for all NVRs onsite.

Standalone NVR

A Standalone NVR manages the record capability of itself and any attached Standard NVRs. A standalone NVR is typically used in security, surveillance, and monitoring applications or anywhere where full Portal Server functionality is not required. In a standalone NVR installation, a subset of the Portal Server application is installed on one machine and the NVR application is installed on the same machine or on a different machine. If you need to add recording capacity, you can add multiple Standard NVRs necessary. You use the subset of the Portal Server application to configure the NVR (see Configuring a Standalone NVR). A standalone NVR has these characteristics:

•supports record only.

•records 10 or 40 concurrent streams depending on license.

•is configured with a subset of the Portal Server Admin Console that has limited features—no VBricks, STBs, etc.

•records from the Scheduler module only.

•has limited end user features. End users can see only the Scheduler, the Status page, and the Help system.

•supports "batch" recording where one large file is recorded into multiple smaller files.

ETV Portal Server Admin Guide 111