VBrick Systems ETV v4.2.1 manual Extended Logging Properties

Enable Access Logging	Sets access logging on or off. Default = off. The log files are saved
	in Program Files\VBrick\MCS\Logs.
Log Cycle Time	New log files can be created daily, weekly, or when the file reaches
	a certain size. Old files are never deleted or written over.
Log File Directory	Specifies where the log files are saved. This can be on the same
	machine as the Portal Server or on a different machine in the same
	network.
Cycle Log File	Click Cycle Now to close the existing log files and create new files.
Extended Logging	See Extended Logging Properties below. Determines what fields
Properties	are logged.
Logger Timeout Values	The timeout values (default two hours for stored content, four
	hours for live content) are typically used when a client machine
	crashes or hangs.

Extended Logging Properties

Use the following window to specify which fields are logged. If you are using EtherneTV Reporter, all fields must be selected. The items in parentheses (e.g. cs-username) refer to the header field shown in the actual log file (see Figure 11 below). The fields are self- explanatory and most are standard W3C fields. (See http://www.w3.org/TR/WD- logfile.html for more about W3C log file formats.) Note that the fields used in each log will vary slightly and unused fields are marked with a hyphen "-". Note that the following non- standard fields may be incompatible with some reporting tools and can be de-selected: x-address, x-port, and x-duration. For best results with log analysis tools, do not de-select any other fields.

64 © 2008 VBrick Systems, Inc.