VBrick Systems ETV v4.2.1 manual Security IWS Server Port

Global Settings

3.In Select VBrick, select one or more existing VBricks for which a SAP has been received. If you select one VBrick, this populates the VBrick Configuration panel. (If you select multiple VBricks, it does not populate the panel; if you need to configure the VBricks, you must add them one at a time.)

4.Complete or modify the fields in VBrick Configuration as necessary. Note that you must enter a User Name and Password and confirm that Password or the configuration will fail.

5.Click Submit when done. This adds the new configuration to the list of configured VBricks shown on the previous page.

Note The only time you will manually complete the VBrick Configuration fields is when you are defining the configuration for a VBrick that will be added to the network at a later time. In this case, you will need to know the following configuration data in advance.

Host Name	Required. Host name of VBrick.
IP Address	Required. IP address of VBrick.
User Name	Defaults to system-defined value if blank.
User Password	Defaults to system-defined value if blank.
Confirm Password	Defaults to system-defined value if blank. Must match User Password
	if entered above.
Software Revision	Optional. To get the Software Revision in IWS, go to Status > System
	Information > Release Revision.
HTTP Port	Optional. To get the HTTP Port in IWS, go to Configuration > System
	> Security > IWS Server Port.

ETV Portal Server Admin Guide 37