VBrick Systems ETV v4.2.1 manual Increasing the Ingestion Rate, Running the Migration Tool

NXG-to-VOD-W Content Migration

Increasing the Ingestion Rate

You can make the migration process substantially faster by increasing the rate at which files are ingested on the VOD-W server.

TTo increase the ingestion rate:

1.On the VOD-W server, go to Start > Control Panel > InfoValue QuickVideo > QVCS > Advanced.

2.Set the Transfer Rate to 1000000 and click OK. Click OK again to exit.

3.When the content migration is complete, reset the Transfer Rate to the default (10000).

Running the Migration Tool

TTo migrate video files to the VOD-W:

1.Launch the Migration Tool. Go to C:\Program Files\Vbrick\MCS\utils\ NXGtoVODWMigrationTools and double-click on VBMCSReplicateContent.exe

2.Complete all required fields as explained below.

3.Select Save to File to create a status file that will show which files were ingested

successfully.

4.Click Start to begin the migration immediately, or use the scheduling options to run later.

5.If necessary, when the content migration is complete, reset the Transfer Rate to the default (10000).

ETV Portal Server Admin Guide 153