Xantrex Technology ENET-XFR3 manual Baud Rate Selection, 6 Jumper J2 Settings for Baud Rate

Installation and Configuration

Baud Rate Selection

Serial transmission sends and receives data in bit streams at fixed bit rates. Both the computer and the interface must have the same bit rate setting for proper communication. The default baud rate is 9600. We recommend that you do not change this setting. If the setting must be changed, use Table 2-6to select the correct jumper positions. You will need to remove the cover to change any jumpers. See “Changing Internal Jumpers” on page 2–8.

Table 2-6Jumper J2 Settings for Baud Rate

9600BaudRateB3closed		B2closed	B1closed
4800	open	closed	closed
2400	closed	open	closed
1200	open	open	closed
600	closed	closed	open
300	open	closed	open
150	closed	open	open
75	open	open	open

2–18 TM-XR9B-01XN