Safety
5.Do not operate the inverter/charger if it has received a sharp blow, been dropped, or otherwise damaged in any way. If the unit is damaged, see the “Warranty and Product Information” section in the RS2000 Sine Wave Inverter/Charger Operation Guide.
6.Do not disassemble the inverter/charger; it does not contain user serviceable parts. Take it to a qualified service person when service or repair is required. Incorrect reassembly may result in a risk of electrical shock or fire. Internal capacitors remain charged after all power is disconnected. For instructions on obtaining service, see the “Warranty and Product Information” section in the RS2000 Sine Wave Inverter/Charger Operation Guide.
7.Do not expose the inverter/charger to rain, snow, or water.
8.To reduce risk of electric shock, disconnect all sources of AC and DC power from the inverter/charger attempting any maintenance or cleaning. Turning off controls will not reduce this risk.
9.The inverter/charger must be provided with equipment grounding conductors connected to the AC input ground and chassis ground terminals.
CAUTION
Cautions identify conditions or practices that could result in damage to the unit or other equipment.
To reduce the risk of overheating, keep the ventilation openings clear and do not install the inverter/charger in a compartment with limited airflow or inadequate clearances around the unit. Refer to the RS2000 Sine Wave Inverter/Charger Installation Guide for required clearance.
viii |
