Xantrex Technology RS2000 manual Fault Messages

				Troubleshooting
Table 4-4	Fault Messages
Fault		Fault
Number	Message	Type	Cause	Solution
F24	Reset the RS2000. If	Escalating	AC Under Voltage	Clear the fault and attempt
	problem persists, call	Auto Fault.	Shutdown (Inverter	restart. If problem persists, call
	customer service.	Must occur	AC output)	customer service.
		3 times in
		60 seconds
		before
		becoming
		a manual
		fault.
F25	Reset the RS2000. If	Escalating	Auxiliary Power	Clear the fault and attempt
	problem persists, call	Auto Fault.	Supply Over Voltage	restart. If problem persists, call
	customer service.	Must occur	Shutdown	customer service.
		3 times in
		30 seconds
		before
		becoming
		a manual
		fault.
F26	Reset the RS2000. If	Escalating	Auxiliary Power	Clear the fault and attempt
	problem persists, call	Auto Fault.	Supply Under Voltage	restart. If problem persists, call
	customer service.	Must occur	Shutdown	customer service.
		3 times in
		30 seconds
		before
		becoming
		a manual
		fault.
F29	Reset the RS2000. If	Manual	AC Backfeed	Clear the fault and attempt
	problem persists, call		Shutdown	restart. If problem persists, call
	customer service.			customer service.
F30	is too cold and has	Manual	Battery Under	Clear the fault and attempt one
	shut down. See		Temperature Fault	restart. Try restart again when
	guide.			ambient temperature is warmer
				or gently warm the battery.
F40	Reset the RS2000. If	Manual	No IPC	Service required.
	problem persists, call		communication
	customer service.

975-0125-01-01 4–15