Xantrex Technology RS2000 manual Safe Mode, To enter or exit Power Save mode

Operation

To enter or exit Power Save mode:

◆Press and hold the System button on the System Control Panel for one second.

After you release the System button, the System Control Panel screen and indicator lights will turn off.

You can also enter or exit Power Save mode on the System Settings menu by selecting Desired Mode and scrolling to PowerSave as shown in Figure 2-4.

Operate

[Advanced]

	Figure 2-4Power Save Mode
Returning to	If an inverter/charger supplies power to the network, applying AC input
Operate mode	with utility power or generator power automatically returns the system to
	Operate mode.

Safe Mode

	CAUTION: Unexpected behavior
	Before installing or removing a device on the network, put the network into Safe
	mode. This prevents unexpected behaviour.
Characteristics	Selecting Safe mode stops the generator (if it is running) and puts the
	System Control Panel (and all Xanbus-enabled devices) into Safe mode.
	While in Safe mode, the System Control Panel remains powered,
	“listening” to and reporting its status to the network. However, the ouptut
	power of all Xanbus-enabled devices is disabled and all inverting,
	charging, and generator starting activity stops. In Safe mode, the RS2000
	will not pass AC.

2–8 975-0125-01-01