
Introduction
RS2000 Features
Front Panel Features
Before you begin to operate the RS2000, review the front panel features shown in Figure
4
2 |
|
| 2 |
3 | 2 | 1 | 3 |
|
| 2 |
Figure | Front Panel of the RS2000 |
Table | Front Panel Features |
Feature Description |
|
1AC wiring compartment access panel provides access to the terminal block for wiring the AC input and AC output.
2AC knockouts provide access for AC input and AC output wiring. A total of four knockouts are provided on the unit: two on the front and one on each side (not shown).
3Mounting flanges are used for mounting the unit. A total of six flanges are provided on the unit.
4Fans are located on the top of the unit and the bottom of the unit.
•Top external fan is an intake fan that activates when the internal temperature of the inverter/charger increases. The fan speed varies with the internal temperature and turns off when the inverter/charger cools down. (This internal temperature may be caused by heat in the inverter/charger or by high ambient temperature.)
•Bottom internal fan (not shown) is an exhaust fan and runs continuously if the unit is inverting or charging.